Select options
This product has multiple variants. The options may be chosen on the product page
SLVR® Scrubs information from SLVR Wear™. Use these section links to explore the story, product details and practical information on this page.
Silver Scrubs®
Medical Scrubs Made with Fabric Lab-Tested to 50 GHz
SLVR® Scrubs - SLVR777™ fabric: 30.7 dB (99.91%) at 50 GHz, CNAS-accredited lab report DZ2025A082
Fabric test results apply to the tested sample and vary by frequency. Built for the modern healthcare professional.
Shop Silver Scrubs®
Select options
This product has multiple variants. The options may be chosen on the product page
Select options
This product has multiple variants. The options may be chosen on the product page
Select options
This product has multiple variants. The options may be chosen on the product page
Select options
This product has multiple variants. The options may be chosen on the product page
Select options
This product has multiple variants. The options may be chosen on the product page
SLVR™-Powered Protection
Our Fabric technology harnesses the properties of silver at the molecular level. Through Fabric engineering, natural silver is transformed into a specialized system.
- ELECTROMAGNETIC SHIELD: Helps shield against RF signals from wireless devices, Wi-Fi, 5G, and electronic systems through silver-fiber fabric technology.
- FABRIC FORCE FIELD: Silver-fiber particle technology may help reduce the potential effects of electromagnetic interference.
Created for Healthcare Heroes Like You
Designed to reduce RF signal exposure through the fabric, so you can focus on your patients.
This extended testing helps ensure reliable shielding at higher frequencies. You can wear SLVR™ with confidence knowing your protection is designed to keep pace with modern technology.
Not all RF signal attenuation is created equal. That means RF signal attenuation even as frequencies increase. When exposure rises, your protection should remain steady.
Are You Being Slammed with EMF Waves
Without Knowing It?
SLVR® Scrubs Fabric Test Results
The SLVR777™ fabric used in SLVR® Scrubs was tested by a CNAS-accredited (ISO/IEC 17025) laboratory, Beijing Daze Technology (report DZ2025A082, October 2025). Result: 30.7 dB (99.91%) signal attenuation at 50 GHz through a single layer of fabric, and 35.2 dB (99.97%) or more at every test point from 30 MHz to 40 GHz. Results are for the fabric sample tested. Whole-garment performance is lower at openings and seams. Designed to reduce RF signal exposure. Not a medical device.
15 frequencies (16 measurements) from 9 kHz to 50 GHz
Measured using GJB 5792A-2021, a Chinese military-standard (GJB) shielding measurement method.
View the DZ2025A082 measurement table
Download SLVR® Scrubs SLVR777™ Lab Report DZ2025A082 (PDF)
MRI note: Silver fibers are conductive. Remove before entering the MRI scanner room.
Choose your scrub top, pants or complete set
Start with the pieces you need for your uniform. The men’s and women’s ranges include a top, pants and a complete set. Review the measurements for each piece before selecting a size. A complete set allows different top and pant sizes, so the two selections do not have to be the same. Record both choices when comparing a set with the size information.
Review fit one piece at a time
Think about how you normally wear a uniform: the layers underneath, the room you want around the shoulders and waist, and the length needed for the top and pants. Use the published measurements instead of assuming that a size label from another brand has the same dimensions. If a measurement is unclear, ask the team about the specific piece before ordering.
For a replacement or additional piece, identify whether you are comparing a top-only, pants-only or complete-set listing. Current product pages show the available choices and ordering details. A product image illustrates the item; the size information and selected options determine the combination you add to your cart.
Read the fabric information alongside the report
The stated composition of SLVR777™ fabric is 59% polyester, 35% metallic and 6% spandex. The laboratory information on this page applies to the tested scrub-fabric sample. It does not establish the performance of another fabric or product category. Use the Lab Results page to find the report, the measurement table and the testing status of other items.
A frequency-specific result describes the measurement at that frequency. It should be read with the rest of the table and the report’s conditions. Whole-garment performance is lower at openings and seams. Technical apparel is not a medical device, and a fabric measurement should not be presented as a clinical outcome or a replacement for workplace safety procedures.
Keep the limitations with the result
When comparing a statement on a product page, identify the tested material, report number, method and measurement point. Check whether the statement refers to a sample or to a finished item. The full approved laboratory wording above includes those limitations so that a headline number is not separated from its context. Contact the team if you need help locating a particular table entry.
Care and workplace considerations
Follow the sewn care label supplied with the garment. General answers about clothing or accessories should not replace the instructions for a specific item. Keep the label available for future reference, and identify the product if you ask the team to clarify a care statement. Cleaning instructions and laboratory performance measurements answer different questions.
Always follow your facility’s uniform and personal-protective-equipment requirements. Silver fibers are conductive. Remove the garment before entering the MRI scanner room, and follow your facility’s MRI safety policy. Do not treat the presence of conductive textile fibers as permission to enter a restricted clinical area.
Questions before completing checkout
Review the top size, pant size, quantities and any other selections before adding a set to the cart. Check the current shipping information and return and exchange policy with the product details. For an existing purchase, include the order number when contacting support. For general background on the yarn standard mentioned on the site, use the independent OEKO-TEX STANDARD 100 reference.